PNEUMATIC STAPLER TSN-9040H

Pneumatic stapler for 90 series staples (having wire size 1.25x1.00 mm).

The staple gun is supplied inside a plastic carrying case together with a drip oiler and lubricating fluid, a ¼”male nipple for quick coupler “Germany type”, and descriptive technical documentation.

Tool features: easy depth of drive adjustment with a simple turn to the setting knurled knob placed on the tool side.

Safety lever identifiable with the nose for a better firing positioning and for safety locking when the magazine of the stapler is empty, in order to avoid dry firing and subsequent breakage of the bumper.

A protective no-mar rubber pad on the nose avoids damages to the fixing area.

The rear exhaust is placed in the handle of the pneumatic tool.

Mode of operation: connect the stapler to a source of compressed air; pull the specific lever to open the magazine and then pull back the sliding magazine; insert a staple strip, so that its crown be in contact with the top of the magazine; close the sliding magazine and the staple gun is ready for use.