PNEUMATIC ANGLED FINISH NAILER TYI-261850AB

Pneumatic brad nailer for 26° angled brads, C100 series, having wire size 1.25x1.00 mm.

The bradder is supplied inside a plastic carrying case together with a drip oiler and lubricating fluid, a ¼” male nipple for quick coupler “Germany type”, and descriptive technical documentation.

Tool features: possibility to change the depth of drive simply by adjusting the setting knurled knob placed on the side of the air tool.

Contact safety lever, identifiable with the nose, for a better firing positioning and for safety locking when the magazine of the nail gun is empty, in order to avoid dry firing and subsequent breakage of the bumper.

A protective rubber pad on the nose prevents the bradder from denting worktop.

An adjustable exhaust deflector placed on the head of the tool diverts air away from the operator.

Mode of operation: connect the nailer to a source of compressed air; pull the specific lever to open the magazine and then pull back the sliding magazine; insert a strip of brads, so that their tips be in contact with the base of the magazine and their heads be in the specific groove. If the brad does not fit in the magazine, it means that the length is wrong. Otherwise, close the sliding magazine and the nail gun is ready for use.